MOQ (minimum order quantity) PU (Price unit): E (item), H (100 items), T (1000 items), p (pair), P (pack), k (kilogram), h (100 meters) RRP recommended retail price. Stock and prices are updated on an hourly basis. After Registration and Login you will see your individual customer prices and CSV file upload, watchlists and requestlist are accessible in the Customer Portal. All prices are net excluding V.A.T. We do not deliver to private end-users.
Note
• You will find suitable High Power LED Module here
• You will find Inrush Current Limiters at product group M7564
• You will find Connectors from product group F9811
• You will find Potentiometers at product groups C3211 and C3212
Features
• Constant current • Independent operating device • Wide range input • Metal housing • Overload protection by current limiting, auto recovery • Protected against short circuit, overload, overvoltage, overtemperature • Built-in PFC circuit • Suitable for LED lighting applications • SELV compliant • Safety standards: EN61347-1, EN61347-2-13 and others • EMC Standards: EN55015, EN61000-3-2 Class C, EN61000-3-3, EN61547 and others • Complies with 6kV Surge Immunity Level • 5 years warranty • ELG-200_: without protective conductor, PE connection via housing • ELG-200_3Y: protective conductor in the primary cable • ELG-200_: IP67, current fixed preset • ELG-200_A: IP65, current limit adjustable via internal potentiometer on bottom of housing • ELG-200_B: IP67, dimming via led out control line, 3 in 1 dimming function (0...10V DC, PWM, 100k Ohm potentiometer) • ELG-200_AB: IP65, current limitation adjustable via internal potentiometer on bottom side of housing, dimming via implemented control line, 3 in 1 dimming function (0...10V DC, PWM, 100k Ohm potentiometer) • ELG-200_DA: IP67, DALI interface • ELG-200_D2: IP67, built-in smart timer dimming function and programmable output characteristics
Technical Specifications
Input Voltage:
100...305V AC (47...63Hz)
142...431V DC
Input Inrush Current, Max.:
65A
No-load power, less than:
0,5W
Power consumption in networked standby mode (Pnet), smaller than (Dali):
0,5W
Withstand Voltage
I/P-O/P:
3750V AC
I/P-FG:
2000V AC
O/P-FG:
1500V AC
Operating Temperature:
-40...+85°C
Dimensions(LxWxH):
244x71x37,5mm
Weight:
1220g
I/P = Input, O/P = Output, FG = Frame Ground
Part Nr.
UA
IA
PA
DIA
h
[V]
[mA]
[W]
[%]
[%]
ELG-200-C700_
142...286
700
200,2
5
93
ELG-200-C700A_
142...286
700
200,2
5
93
ELG-200-C700B_
142...286
700
200,2
5
93
ELG-200-C700AB_
142...286
700
200,2
5
93
ELG-200-C700DA_
142...286
700
200,2
5
93
ELG-200-C1050_
95...190
1050
199,5
5
93
ELG-200-C1050A_
95...190
1050
199,5
5
93
ELG-200-C1050B_
95...190
1050
199,5
5
93
ELG-200-C1050AB_
95...190
1050
199,5
5
93
ELG-200-C1050D2_
95...190
1050
199,5
5
93
ELG-200-C1400_
71...142
1400
198,8
5
92
ELG-200-C1400A_
71...142
1400
198,8
5
92
ELG-200-C1400B_
71...142
1400
198,8
5
92
ELG-200-C1400AB_
71...142
1400
198,8
5
92
ELG-200-C1400DA_
71...142
1400
198,8
5
92
ELG-200-C1400D2_
71...142
1400
198,8
5
92
ELG-200-C1750_
57...114
1750
199,5
5
92
ELG-200-C1750A_
57...114
1750
199,5
5
92
ELG-200-C1750B_
57...114
1750
199,5
5
92
ELG-200-C1750AB_
57...114
1750
199,5
5
92
ELG-200-C1750DA_
57...114
1750
199,5
5
92
ELG-200-C1750D2_
57...114
1750
199,5
5
92
ELG-200-C2100_
48...96
2100
201,6
5
92
ELG-200-C2100A_
48...96
2100
201,6
5
92
ELG-200-C2100B_
48...96
2100
201,6
5
92
ELG-200-C2100AB_
48...96
2100
201,6
5
92
ELG-200-C2100DA_
48...96
2100
201,6
5
92
ELG-200-C2100D2_
48...96
2100
201,6
5
92
UA = Output Voltage Range, IA = Output Current, PA = Output Power, DIA = Output Current Tolerance, h = Typ. Efficiency
Note
Power supply for the operation of LED light sources.
These power supplies are intended for installation in end devices.
Used electronic devices are recyclable materials and do not belong in household waste. If the device is at the end of its service life, dispose of it in accordance with the applicable legal regulations at the collection points of the disposal system. Disposal with household waste is prohibited.
Protection class I device. The protective conductor (PE) must be connected to the housing.(applies to ELG series without ending (3Y))