MOQ (minimum order quantity) PU (Price unit): E (item), H (100 items), T (1000 items), p (pair), P (pack), k (kilogram), h (100 meters) RRP recommended retail price. Stock and prices are updated on an hourly basis. After Registration and Login you will see your individual customer prices and CSV file upload, watchlists and requestlist are accessible in the Customer Portal. All prices are net excluding V.A.T. We do not deliver to private end-users.
Note
You will find suitable connectors here..
You will find suitable accessories in product group L7951.
A table for configuration of the desired power supply can be found here.
NMP650, NMP1K2
Frontends
Features
• Fully operational with matching output modules • Individally configurable • Six Slots NMP1K2 and four Slots NMP650 • Enclosed case, built-in fan, screw terminals • Universal input • Over temperature protection • Built-in active PFC function • 1U Low profile • Parallel function • Built-in remote On/Off control • Built-in auxiliary power 5V/1,5A (NMP650) or 5V/2A (NMP1K2) • EN60601-1 and EN62368-1 • 2x MOPP
Technical Specifications
Input Voltage:
90...264V AC (47...63Hz)
120...370V DC
Input Inrush Current, Max.:
40A
Leakage Current
Earth:
<400µA
Touch:
<100µA
Withstand Voltage
I/P-O/P:
4000V AC
I/P-FG:
2000V AC
O/P-FG:
500V AC
Operating Temperature:
-30...+70°C
Weight
NMP650:
1450g
NMP1K2
2000g
I/P = Input, O/P = Output, FG = Frame Ground
NMS-240-_; NMD-240
Output Modules for Frontends
Features
• Modular design for installation in a front end • Overload protection by current limiting • protected against short circuit, overload, overvoltage and overtemperature • Parallel function • Switching on and off of output voltage via remote signal • DC-OK signal • Internal auxiliary voltage 5V/10mA • Output voltage and output current programmable • For medical technology applications (2xMOPP): • 5 years manufacturer warranty • NMD-240: two output channels
Note
The components of the NMP series enable an individually configurable, multi-channel AC/DC power supply unit. If the individual modules are connected in series or parallel, additional accessories are required. The modular system is assembled by the manufacturer according to customer specifications and delivered as a finished end device. The NMP650 and NMP1K2 front ends, the NMS-240-xx DC/DC output modules and the necessary accessories are available individually for urgent sample setups or prototypes in industrial or medical applications, but also for self-assembly. Once the components have been assembled, the customer may have to attach a device label depending on the further use, see example label opposite.
Please note: Power supplies which, due to their design, are intended as components for installation in electrical installations or systems, may only be installed by qualified personnel (according to relevant standards e.g. IEC60364, VDE0100, VDE0105)! If the requirements exceed sample quantities, we recommend the purchase of pre-assembled devices from the manufacturer.
