MOQ (minimum order quantity) PU (Price unit): E (item), H (100 items), T (1000 items), p (pair), P (pack), k (kilogram), h (100 meters) RRP recommended retail price. Stock and prices are updated on an hourly basis. After Registration and Login you will see your individual customer prices and CSV file upload, watchlists and requestlist are accessible in the Customer Portal. All prices are net excluding V.A.T. We do not deliver to private end-users.
• Is a applied between components that may overheat and heat sinks to ensure rapid heat transfer. • Combines the properties of silicone rubber pads with those of a conventional heat transfer paste, and can be used as a low bond strength adhesive, sealant or gasketing compound.
Features
• Single Part, low odour RTV • Solvent free • High thermal conductivity • Wide range of operating temperatures -50...+230°C • Remains flexible and elastic at high temperatures • Good chemical resistance • Good electrical insulation characteristics • Moisture cure • Releasing oxime upon cure
Technical Specifications
Colour:
White
Viskosity:
Non Slump Paste
Thermal Conductivity:
1,7W/mK
Tensile Strength:
2MPa
Elongation at Break:
300%
Temperature Range (Short Term):
-50...+200°C (250°C)
Storage Temperature:
+10...+25°C
Specific Gravity/Density:
2,3g/ml
Dielectric Strength:
>8kV/mm
Electrical Insulation:
1x1014Ohm/cm
Skin Forming Rate:
10...15min.
Cure Time (20°C):
24h
TCRGUNB
Dispensing Gun for 75ml Sytinge
Features
• This is a very easy and accurate dispensing method for TCOR and TCR.
Terms of Delivery
Minimum order quantity: 1 PKU = 1 piece Form of delivery: Syringe