Passive and Electromechanical Components

ABS Enclosures from Supertronic for Wall Mounting Devices

13.09.2021 | Supertron­ic's enclo­sures, made of high­ly resis­tant ABS, con­sist of a round-shaped, 3-part cov­er and a bot­tom part that is fixed to the wall. This makes the enclo­sures easy to open from the front or sides and easy to access. The remov­able front pan­el thus enables easy han­dling of the enclo­sure con­tents  continue

Fuse Links 5x20mm According to UL Standard: Series UL520.600, UL521.000 and UL522.200 from ESKA

07.09.2021 | With the device pro­tec­tion fus­es of the UL520.600, UL521.000 and UL522.200 series from ESKA, Schukat has var­i­ous micro­fus­es in the 5x20mm dimen­sion in its range, which are approved in accor­dance with the UL 248-14 safe­ty stan­dard. All three series sup­ply rat­ed volt­ages from 125 to 250V and have a break­ing capac­i­ty of 35 to 10,000 A (at 120VAC)  continue

Current Compensated Chokes RN Series from Schaffner with Excellent Thermal Behavior

01.09.2021 | The chokes of the RN series from Schaffn­er are char­ac­ter­ized by a high sat­u­ra­tion resis­tance as well as very good ther­mal behav­ior and are very ver­sa­tile due to a large vari­ety in the range. The main focus is on appli­ca­tions with low cur­rent con­sump­tion and very com­pact design dimen­sions  continue

Supercapacitors of the FY, FT, FG and FS Series from KEMET as Reliable Energy Storage Devices

30.08.2021 | With the super­ca­pac­i­tors of the FY, FT, FG and FS series from KEMET, we offer elec­tri­cal dou­ble-lay­er capac­i­tors (EDLCs) in pin design in the pro­gram. Thanks to their spe­cial char­ac­ter­is­tics, which dif­fer from con­ven­tion­al capac­i­tors and bat­ter­ies, they are used in appli­ca­tions requir­ing high ener­gy stor­age. In a DC cir­cuit, they can be used like a sec­ondary bat­tery and are ide­al for use in low-volt­age DC holdup appli­ca­tions  continue

New from HAWA: Neutrik Connection Cables and Connecting Leads Equivalent to Wieland GST18i3

26.08.2021 | We have added the well-known Neu­trik con­nec­tion cables of the pow­er­CON and TRUE1 series to our range as well as a con­nec­tion cable equiv­a­lent to Wieland GST18i3. Both cables are man­u­fac­tured by the proven man­u­fac­tur­er HAWA. The Neu­trik pow­er­CON series mains cables have a mould­ed right-angle Schuko plug, a mount­ed Neu­trik cou­pling NAC3FCA and a black H05VV-F 3 G 1.5 sup­ply cable  continue

Plastic Housing with Maximum Shielding Effectiveness of 99.999999% up to 105db from STB-Abschirmtechnik

24.08.2021 | Schukat electronic offers shield­ed stan­dard plas­tic enclo­sures of the STB Abschirmtech­nik in var­i­ous sizes for both the low-frequency and the high-frequency radi­a­tion range. They meet indus­tri­al require­ments in terms of sta­bil­i­ty, light­ness and EMC suit­abil­i­ty and, thanks to the inter­nal all-met­al coat­ing, achieve a max­i­mum shield­ing effec­tive­ness of 99.999999% up to 105db, which is the high­est shield­ing val­ues cur­rent­ly known  continue

Compact SMD Thermal Fuses RTS Series from Schurter, for Automotive, Medical and Industrial Applications

19.08.2021 | To pro­tect high­ly inte­grat­ed pow­er electronics from over­heat­ing, Schukat offers the par­tic­u­lar­ly com­pact ther­mal fus­es in Schurter’s RTS (reflow­able ther­mal switch) series in SMD for­mat. The fus­es are used in the auto­mo­tive and med­ical seg­ments and oth­er indus­tri­al sec­tors, and, thanks to com­plete gal­van­ic iso­la­tion, reli­ably pro­tect pow­er semi­con­duc­tors such as MOSFETs, ICs, IGBTs, tri­acs and SCRs  continue

New in our Range: Extruded Aluminium Profile Enclosures from Fischer Elektronik

17.08.2021 | We have expand­ed our port­fo­lio of alu­mini­um enclo­sures to include uni­ver­sal alu­mini­um small enclo­sures and spe­cial design enclo­sures from the man­u­fac­tur­er Fischer Elektronik. The FR5525100ME alu­mini­um pro­file enclo­sure offers a mod­ern design in com­bi­na­tion with a shock-resis­tant, yel­low plas­tic design frame and seal for use as a desk­top enclo­sure  continue

Remarkable Ripple Current and Temperature Characteristics: The New Panasonic Polymer Hybrid Capacitor ZU Series

11.08.2021 | For par­tic­u­lar­ly demand­ing appli­ca­tions, Schukat has added the new ZU series of poly­mer hybrid capac­i­tors from Panasonic Indus­try to its range. The series fea­tures remark­able rip­ple cur­rent and tem­per­a­ture char­ac­ter­is­tics. Thanks to a reduc­tion in pow­er dis­si­pa­tion, the ZU series is able to with­stand rip­ple cur­rents up to 53 per­cent bet­ter than its pre­de­ces­sors in the ZS series  continue

New from Wago: 221-2411 Inline Splicing Connector for Universal Conductor Connection in Through Direction

05.08.2021 | The Wago 221 series feed-through con­nec­tor with lever enables sim­ple, fast and safe con­nec­tion of all types of con­duc­tors from 0.2 to 4mm² in feed-through direc­tion with­out tools. It com­bines all the well-known advan­tages of the 221 con­nec­tion ter­mi­nal series in a slim design: a uni­ver­sal con­duc­tor con­nec­tion that is com­plete­ly tool-free thanks to the lever tech­nol­o­gy and offers vis­i­bly safe con­duc­tor con­tact­ing thanks to the trans­par­ent cov­er  continue

USB-C Connector from MPE Garry: Series 719 with USB 3.1 Type C, SMD Design

02.08.2021 | With the 719 series from MPE Garry, we are expand­ing our port­fo­lio to include USB 3.1 Type C con­nec­tors in SMD design. These cop­per alloy com­po­nents, with their par­tial­ly gold-plat­ed con­tact sur­face (24 con­tacts), have enlarged SMD sol­der­ing sur­faces that allow high­er mechan­i­cal load­ing. In addi­tion, the SuperSpeed+ stan­dard enables data trans­fer rates of up to 10 GBit/s.  continue

Compact, Industrial Ethernet Connectors from Hirose for Industrial Applications: IX Series - Robust and EMC-resistant

29.07.2021 | Schukat has now added the IX eth­er­net con­nec­tors from Hirose, designed for indus­tri­al appli­ca­tions, to its prod­uct port­fo­lio. Com­pared to reg­u­lar mod­u­lar RJ-45 solu­tions, the IX series offers a 75% size reduc­tion, pre­sent­ing an ide­al choice when instal­la­tion space is lim­it­ed. Par­al­lel mount­ing is pos­si­ble at P=10mm.  continue

High Switching Capacity up to 16,000A: Two New iMaXX Fuse Series for Electric Vehicles

27.07.2021 | With the EV29-M8 and EV29-M10 series from iMaXX, Schukat has added new auto­mo­tive fus­es for elec­tric vehi­cles to its range. The fus­es demon­strate high switch­ing capac­i­ty of 16,000A at 500VDC. The dou­ble tube is filled with quartz sand and made of poly­ester, while the con­nec­tions, made of pure cop­per, ensure max­i­mum heat dis­si­pa­tion  continue

SMD Supercapacitors from KEMET: FC Series for Applications with High Energy Storage

16.07.2021 | KEMET's FC series super­ca­pac­i­tors, also known as elec­tri­cal dou­ble lay­er capac­i­tors (EDLCs), extend our port­fo­lio of sur­face mount­able devices and are avail­able in SMD design. They have been spe­cial­ly devel­oped for reflow sol­der­ing at a max­i­mum sol­der­ing tem­per­a­ture of 235°C (260°C for the FCS types) and can be mount­ed direct­ly onto the (PCB)  continue

High-quality ABS Miniature Enclosures for Remote Controls from Supertronic

14.07.2021 | In no less than three dif­fer­ent mod­els, we have includ­ed the com­pact ABS hand­held hous­ings with bat­tery com­part­ment for hold­ing a trans­mit­ter for remote con­trols from Supertron­ic for you. On the one hand, the 3-piece, ergonom­i­cal­ly shaped and 65x41x17mm com­pact small enclo­sures. They con­sist of a low­er and upper part in black, grey or red and a red mid­dle part with one or two red but­tons  continue

Sealed Mains Transformers from Zettler: BV20 and BV30 Series with 0.35 to 2.8 VA

09.07.2021 | The encap­su­lat­ed, VDE and UL Class 2 cer­ti­fied trans­form­ers are char­ac­terised by a small design and low heat gen­er­a­tion. With out­put pow­er rang­ing from 0.35 to 2.8 VA, Zettler's BV series is per­fect for appli­ca­tions such as LED light­ing, elec­tri­cal mea­sur­ing equip­ment, motor con­trols, oxy­gen con­cen­tra­tors and ther­mostats  continue

High Capacities for Automotive and Industrial Applications: The New ZSU Polymer Hybrid Capacitors from Panasonic

07.07.2021 | Panasonic Indus­try's new ZSU series poly­mer hybrid capac­i­tors achieve an 80 per cent increase in capac­i­tance com­pared to their pre­de­ces­sor ZS series and are avail­able from Schukat. Even under tough oper­at­ing con­di­tions, they meet the high­est require­ments in terms of reli­a­bil­i­ty, effi­cien­cy and per­for­mance. This makes them par­tic­u­lar­ly suit­able for 48V appli­ca­tions in the auto­mo­tive sec­tor such as oil pumps, EPS, e-com­pres­sors and ADAS …  continue

FN 402 PCB Filters from Schaffner: Low-cost Single-phase Filters for PCB-mounting

05.07.2021 | The FN 402 sin­gle-phase fil­ter from Schaffn­er was devel­oped for sim­ple and fast PCB mount­ing. It com­bines the fast avail­abil­i­ty of a stan­dard fil­ter with the nec­es­sary cer­ti­fi­ca­tions and offers a prac­ti­cal solu­tion to pass EMI sys­tem approvals in a short time. The fil­ter offers good con­duct­ed atten­u­a­tion per­for­mance, based on chokes with high sat­u­ra­tion resis­tance  continue

Ekulits Ultra-slim Piezo Fan: Silent, Space-saving and Power-saving

29.06.2021 | Schukat is extend­ing its prod­uct range with the UPF-76Q-220 piezo fan from Ekulit. These piezo ele­ments use the inverse piezo­elec­tric effect, i.e. apply­ing an elec­tri­cal volt­age gen­er­ates a change in length in the piezo­elec­tric mate­r­i­al. The effect con­verts elec­tri­cal ener­gy into mechan­i­cal ener­gy. The ultra flat piezo fan UPF-76Q-220 from Ekulit con­sists of a piezo­ce­ram­ic sur­face and a plas­tic platelet, which is made to oscil­late.  continue

Ultracapacitors and Modules from SECH as Supplement or Replacement for a Primary Energy Source

24.06.2021 | With the new ultra­ca­pac­i­tors from SECH, we now sup­ply three dif­fer­ent types of long-last­ing elec­tric dou­ble-lay­er capac­i­tors (EDLCs) and mod­ules. The capac­i­tors demon­strate very high ener­gy den­si­ty of up to 8Wh/kg and high matched imped­ance pow­er den­si­ty of up to 38kW/kg. This allows them to be oper­at­ed effi­cient­ly with low loss­es even at high charge and dis­charge cur­rents, and cool­ing can be reduced or even elim­i­nat­ed alto­geth­er  continue

Reliable and Failsafe: WIMA Film Capacitors for Medical Applications

21.06.2021 | With the high-qual­i­ty, made-in-Ger­many film capac­i­tors from WIMA, Schukat offers an exten­sive range of dif­fer­ent types for a broad vari­ety of appli­ca­tion areas in the med­ical tech­nol­o­gy field. All WIMA capac­i­tors are excep­tion­al­ly reli­able, with field fail­ure rates approach­ing 0, thus ensur­ing the high­est lev­els of safe­ty. With their excel­lent elec­tri­cal para­me­ters, they deliv­er high per­for­mance along­side an above-aver­age life expectan­cy …  continue

Portfolio Expansion for Conductive Polymer Hybrid Capacitors from Panasonic: ZS, ZSU and ZU Series in an Even Smaller Design

17.06.2021 | We have now extend­ed our SMD range with the small­er ver­sions of the con­duc­tive poly­mer hybrid capac­i­tors in the Panasonic ZS, ZSU and ZU series. With a 10mm diam­e­ter, these capac­i­tors have the same foot­print as the rest of the series but with low­er hous­ings at 12.5mm and 12.8mm high. Devel­oped for the auto­mo­tive sec­tor, the series are AEC-Q200 com­pli­ant  continue